Specifications

Useful Features
Camera Recording
1
Self Recording Message OSD
In Self Recording mode, by following some simple
instructions that appear on the monitor screen,
you can easily record a short video message for
somebody. This feature is especially convenient
for editing video letters.
l Complete steps 1 and 2 of “Normal Self
Recording” on page 30, then perform the
procedure below.
EXTEND button
MESSAGE button
REC START button/
2
Press the MESSAGE button (w). The
instruction “PRESS REC START FOR
LEAVING YOUR MESSAGE” appears
on the monitor, and the “REC START”
indicator starts flashing.
PRESS REC START FOR
LEAVING YOUR MESSAGE
Press the REC START button (b).
“PLEASE START SPEAKING” appears
on the monitor, and recording begins.
Say your message while facing the lens
of the VIEWCAM.
l As time passes, the bar on the monitor
screen diminishes in length from right to left.
l The recording time is preset for 20
seconds.
3 When the remaining recording time
reaches 5 seconds, “EXTEND” will
begin flashing.
l When you want to extend the recording
time, press the EXTEND button ( n ) within
5 seconds. After pressing the button, you
may continue to record for 10 more
seconds.
L
PLEASE START SPEAKING
;I
Osec
20sec
11111-111-111111111
0~~~~)
Osec
1111
20sec
*))I))
4 At the end of recording, “THANK YOU” is
displayed, the screen fades out, and
recording stops automatically. The
VIEWCAM returns to Recording
Standby mode, and “PRESS REC
START FOR LEAVING YOUR MES-
SAGE” is displayed again.
THANKYOU
PRESS REC START FOR
LEAVING YOUR MESSAGE
Note:
l When you want to stop recording before
message recording stops automatically, press
the REC STOP button (m). The screen fades
out immediately and the VIEWCAM returns to
Recording Standby mode.