Specifications

Basic Operations
Playback
Playback
The LCD monitor makes it possible to play back
and see what you have just recorded. Nothing
needs to be connected, allowing instant on-screen
playback. You can hear the sound through the
built-in speaker. You can also watch prerecorded 8
mm video tapes on this VIEWCAM.
Power switch
2
3
I
MdDE DISPLAY button
STOP button
Hold down the Lock
button and slide the
Power switch
to VCR.
Lock button
If the tape is not at the desired point,
press the REW (a) (or FF [w]) button
to rewind (or fast forward) the tape.
[ ::PLAY, FF ISTOPISTI LL
Press the PLAY
To Stop Playback
Press the STOP
button ( I >.
j :,“p,,,,, Ff l$tOPlSTl LL
000 0
R
-J
H 27
Auto Tape Rewind
The tape is automatically rewound when the end
of the tape is reached during playback.
Notes:
l If you wish to turn off the operation button
indicators on the monitor (e.g. because they
interfere with your view of the picture), press the
MODE DISPLAY button. The buttons will still
function as indicated even after their indicators
are turned off.
l To use the infrared remote control, make sure
that the remote control menu item (“REMOTE”)
on the m screen is set to “ON”. The remote
control cannot be used to operate the VIEWCAM
when this menu item is set to “OFF”. See page
29.
Volume Control
While the VIEWCAM is in the VCR mode, push the
Volume control lever to the A or v side to
increase or decrease the volume to your
preference.
The volume control indicator will appear on the
monitor. After adjusting the volume, if the Volume
control lever is left unused, the indicator will
disappear by itself shortly.
VOLUME
00013CG110
Volume c\ontrol
lever
I
Decrease t) Increase
I