Specifications

Basic Operations
Camera Recording
Quick Return
Edit Search
When you have been playing back what you
This VIEWCAM lets you search, without
have recorded, and wish to quickly return to
switching from Camera Recording mode to
recording again from the end of the last
VCR mode, for the point on the tape where you
recorded scene, use the quick return function.
wish to start recording next.
3
4
Hold down the Lock
button and slide the
Power switch to
CAMERA.
Lock button
OFF
VCR
a
1
b
1
i
‘4
\
‘,’ ,‘.
&I~~.
’ \
‘1
Press the MENU button until m
appears.
MENU
Press the RETURN button (w). The
tape will begin winding or rewinding to
the end of
RE-
!-I
TURN
the last recorded scene._
l To cancel,
press the RETURN button again.
When the tape reaches the end of the
last recorded scene, the VIEWCAM
enters Recording Standby mode.
Note:
l If the cassette has been removed since the last
recording, if no recording has been made since
the cassette was loaded, or if the power source
has been interrupted, the RETURN button
indicator will not appear and the quick return
function cannot be used.
Search button 1
I
MODE DISPLAY button
Forward Edit Search button
Using the Edit Search Function
1
2
3
In Recording Standby mode, make sure
that no button control indicators are dis-
played on the monitor.
l If they are displayed on the monitor, turn
them off by pressing the MODE DISPLAY
button.
Press and hold down the Forward Edit
Search button (H) or Reverse Edit
Search button (a) to begin search.
Forward
!zzrch / PLAY FF
1
Reverse
!tzrch [ REW PLAY
1
When you find the point where you want
to begin recording, release the button.
Notes:
l The picture becomes monochrome and some
picture noise appears during forward and
reverse edit searches.
l Forward edit search is performed at the same
speed as normal playback, and reverse edit
search at three times the normal playback
speed.
q 23