Specifications

Preparation
Inserting and Removing a
Cassette
:+gg$g&;;y$T
:
..:_&~ 52 Inserting a Cassette
;‘:.+:.. * ._ 3
-~-+~~ (Ft, y;
‘?SF?? & _ .+.
‘..JTZ :’ _Inr . ‘.?S
. . . ..~
‘.&_:;? 1
<-$.?;J;; a, >$”
Insert the battery pack, or connect the
F;?:‘& -‘;;
VIEWCAM to the AC adapter or car
. . . .._.
. . _:
-_ .,
battery adapter, then slide the release
and open the cassette compartment
door.
l The cassette holder extends and opens
automatically.
Cassette compartment
door release
2 Insert the cassette fully with the window
facing outwards, and with the erasure
protect tab facing upwards.
Erasure protect tab
3 Press the “PUSH” mark gently until the
cassette holder clicks into place.
l The cassette holder retracts automatically.
“PUSH” mark
\-
4 Wait for the cassette holder to fully
retract. Close the compartment door
pressing its centre until it clicks into
place.
I
Press here.
Removing a Cassette
Perform step 1 in the above procedure, then
take out the cassette.
Cautions:
l Do not try to close the door while the cassette
holder is extending or retracting.
l Be careful not to get your fingers caught in the
cassette compartment.
l Do not apply force to the cassette compartment
except for pressing the “PUSH” mark to close it.
l Do not tilt the VIEWCAM or hold it upside down
when you are inserting or removing a cassette. It
may damage the tape.
l Remove the cassette if you will not use the
VIEWCAM for a long time.
l If you do not press the cassette holder closed
correctly in step 3 above, the VIEWCAM’s
cassette protection mechanism might eject the
cassette. If this happens, repeat the insertion
procedure.
l Do not attempt to pick up the VIEWCAM by the
cassette compartment door.
To protect recordings from accidental
erasure
Slide the red projection on the tape cassette in
the direction of the arrow until the red indicator
is visible. When you want to record on the tape
again, slide the red projection in the reverse
direction.
Red indicator
q 15