Programming instructions

Source Components
Multisim Component Reference Guide 1-40 ni.com
A sine wave input of 1.4v RMS or less will be passed undistorted through the “amplifier”
while inputs greater than 1.4 v RMS will show limiting (clipping) at the peaks.
Current Limiter Parameters and Defaults
Symbol Parameter Name Default Unit
Off Input offset 0 V
kGain 1V/V
Rsrc Sourcing resistance 1 Ω
Rsink Sinking resistance 1 Ω
ISrcL Current sourcing limit 10 mA
ISnkL Current sinking limit 10 mA
ULSR Upper and lower power supply smoothing range 1 µV
ISrcSR Sourcing current smoothing range 1 nA
ISnkSR Sinking current smoothing range 1 nA
VDSR Internal/external voltage delta smoothing range 1 νΩ
ComponentRef.book Page 40 Thursday, December 7, 2006 10:12 AM