Programming instructions

Polynomial Source
 National Instruments Corporation 1-19 Multisim Component Reference Guide
1.21.1 Pulse Voltage Source
This component is a pulse source of which the output is measured in voltage.
1.21.2 Pulse Current Source
This component is the same as the Pulse Voltage Source, except that the output is measured in
current.
1.22 Polynomial Source
This is a voltage-controlled voltage source defined by a polynomial transfer function. It is a
specific case of the more general nonlinear dependent source. Use it for analog behavioral
modeling.
The polynomial source has three controlling voltage inputs, namely, V
1
,
V
2
and V
3.
Output Voltage Characteristic Equation
The output voltage is given by:
V A BV CV DV EV FV V GV V
HV IV V JV KV V V
OUT =+∗+∗+∗+∗ +∗∗+∗∗
+∗ +∗∗+∗ +∗∗∗
1 2 3 1 12 13
22 123
2
2
33
2
ComponentRef.book Page 19 Thursday, December 7, 2006 10:12 AM