Programming instructions

Power
Multisim Component Reference Guide 12-16 ni.com
 To view or change a component’s model parameters:
1. Double-click on the placed component and select the Value tab.
2. Click Edit Model to display the Edit Model dialog box.
3. View or edit the model parameters as desired. For more information on the Edit Model
dialog box, refer to the Multisim User Guide, or the Multisim helpfile.
12.2.2 BUCKCCM
This is the Ripley's averaged model (no switching component) of a basic buck converter in a
current mode controlled configuration. This is an improved model over BUCKCM, but it
must operate in continuous conduction mode.
Pin Name Description
VIN Input voltage
VOUT Output voltage
CONTROL Feedback voltage error
GND Ground
D Duty cycle setting
Parameter Description
FS Switching frequency
L Main inductor
RS Equivalent series resistance of output
capacitor
MC Compensation ramp (in V/s)
RI Current sense resistor
VOUT Output voltage
VIN Input voltage
RL Load resistor
ComponentRef.book Page 16 Thursday, December 7, 2006 10:12 AM