Programming instructions

Memory
 National Instruments Corporation 9-11 Multisim Component Reference Guide
9.3 Memory
A number of EPROM and RAM memory devices are included in Multisim. In addition to the
components that contain footprint and model information (for simulation), there are several
that include only the footprint, for PCB layout.
9.4 Line Receiver
Line receivers are devices which are used in applications such as a bridge between analog
signal and digital signals such as RS232 interfaces, or long signal runs over cables. The line
receivers are placed at the receiving end of the application before the digital circuits.
9.5 Line Driver
Line drivers are devices which are used in applications such as a bridge between analog signal
and digital signals such as RS232 interfaces, or long signal runs over cables. The line drivers
are placed at the transmitting end of the application after the digital circuits.
9.6 Line Transceiver
Line transceivers are devices, which are used in applications such as a bridge between analog
signal and digital signals such as RS232 interfaces, or long signal runs over cables. The line
transceivers are placed between the digital circuits.
9.7 CPLDs
ComponentRef.book Page 11 Thursday, December 7, 2006 10:12 AM