Programming instructions

Full-Wave Bridge Rectifier
 National Instruments Corporation 3-11 Multisim Component Reference Guide
3.6.3 Full-Wave Bridge Rectifier Parameters and
Defaults
Symbol Parameter Name Default Typical Value Unit
IS Saturation current 1e-14 1e-9 - 1e-18 cannot
be 0
A
RS Ohmic resistance 0 10 W
CJO Zero-bias junction capacitance 0 0.01-10e-12 F
VJ Junction potential 1 0.05-0.7 V
TT Transit time 0 1.0e-10 s
M Grading coefficient 0.5 0.33-0.5 -
BV Reverse bias breakdown
voltage
1e+30 - V
N Emission coefficient 1 1 -
EG Activation energy 1.11 1.11 eV
XTI Temperature exponent for
effect on IS
3.0 3.0 -
KF Flicker noise coefficient 0 0 -
AF Flicker noise exponent 1 1 -
FC Coefficient for forward-bias
depletion capacitance formula
0.5 0.5 -
IBV Current at reverse breakdown
voltage
0.001 1.0e-03 A
TNOM Parameter measurement
temperature
27 27-50 °C
ComponentRef.book Page 11 Thursday, December 7, 2006 10:12 AM