Programming instructions

Z Loads
 National Instruments Corporation 2-41 Multisim Component Reference Guide
2.22.1 Characteristic Equation
where:
V
out
= output voltage value (magnetomotive force)
i
in
= input current
2.22.2 Coreless Coil Parameters and Defaults
2.23 Z Loads
2.23.1 A+jB Block
The A+jB Block is a circuit block with resistance and inductance connected in series.
“A” is resistance, “B” is inductive reactance (X
L
) at a specified frequency and .
, where f is the specified frequency and L is the inductance.
VNi
out in
=∗
Symbol Parameter Name Default Unit
N Number of inductor turns 1 -
1
2
−=j
fLXL
π
2=
ComponentRef.book Page 41 Thursday, December 7, 2006 10:12 AM