Technical information
Installing the Infrared Device Driver
Installing the Infrared Device Driver
When installing an operating system, you must install the IR
(infrared) device drivers.
Follow the instructions for your operating system.
For OS/2, see “Installing for OS/2.”
For Windows, see “Installing for Windows” on page 197.
OS/2
Installing for OS/2
1
Turn on the computer and start OS/2.
2
If you have not installed DOS and WIN-OS/2 support for
OS/2, install it by referring to your operating systems
documents.
Note:
To go to the DOS command
prompt:
1.
Select OS/2 System.
2.
Select Command Prompts;
then select DOS Full Screen.
3
Go to the DOS command prompt.
4
Insert the Infrared Features Diskette into the diskette
drive.
5
Type A:UINSTALL; then press Enter.
The following screen appears:
Type the SOURCE drive leter (A-Z). When you install a program, the
SOURCE drive letter is the location you are installing FROM.
Source Drive ... [ ]
Enter F1=Help F3=Exit
Installation Options
Installation Source Drive
6
Press Enter; then follow the instructions on the screen.
You have completed the installation of the infrared device drivers.
Go to “Installing the ThinkPad Display Driver” on page 188.
196 IBM ThinkPad 755CX User's Guide