Technical information

Installing the ThinkPad Features Program
DOS
Installing for DOS
To install the ThinkPad Features program for DOS, do the following:
1 Turn on the computer and start the operating system.
2 Insert the Utility Diskette into the diskette drive; then
type A:UINSTALL at the DOS prompt and press Enter.
The following screen appears.
Type the SOURCE drive leter (A-Z). When you install a program, the
SOURCE drive letter is the location you are installing FROM.
Source Drive ... [ ]
Enter F1=Help F3=Exit
Installation Options
Installation Source Drive
3 Press Enter.
4 Select Install DOS ThinkPad Features and
Fuel-Gauge Program from the Installation Options
menu; then follow the instructions on the screen.
You do not need to restart the computer when proceeding to
the installation of the PCMCIA device driver.
You have completed the installation of the ThinkPad Features
program.
Go to “Installing the PCMCIA Device Driver” on page 183 to install
the necessary software for PC Cards. If you do not plan to use PC
Cards, go to “Installing the ThinkPad Display Driver” on page 188.
Chapter 7. Installing Software 181