Service manual

VL-AX1U

4. DISASSEMBLY OF THE SET

Note:

Before removing the cabinet, turn off the power supply, and ascertain that the battery have been removed.

• Remove the 1 screw ((O)XiPSF17P03000). Lifting the fitting cover a little, pull it out in the direction of the arrow.

• Remove the 1 screw ((R)XiPSN17P03000), and pull out the shoe fitting in the direction of the arrow.

• Open the LCD, and remove the 3 screws ((P)XiPSF17P04000) and 2 screws ((S)XiPSN17P04000).

Pull out the top cover ass'y in the direction of the arrow to detach the DV•232C unit FPC and hot shoe FPC. (If the top cover

ass'y is pulled out by force, the FPC may be cut off. Therefore, pull it our gently.)

• Detach the operation key unit FPC and Tilt FPC.

• Remove the 1 screw ((S)XiPSN17P04000), 5 screws ((O)XiPSF17P03000), 1 screw ((K)LX-HZ0063TAFN), and 2 screws

((P)XiPSF17P04000).

• Raise the claw in the direction of the arrow, and pull out the cabinet B ass'y to detach the BtoB of the camera operation unit.

(If the cabinet B ass'y is pulled out by force, the FPC may be cut off. Therefore, pull it our gently.)

Open the LCD

Shoe fitting

Top cover ass'y

Hot shoe FPC

DV·232C unit FPC

Fitting cover

(P)

(S)

(R)

(O)

Cabinet B ass'y

Tilt FPC

Operation key unit FPC

Claw

(K)

(O)

(P)

(S)