User Manual

Useful Features
Useful Features
33
Setting the VIEWCAM to Full
Auto Mode
This VIEWCAM is equipped with auto focus,
auto white balance, and auto exposure
functions. For easy, high-quality camera-
recording, record subjects in Full Auto mode.
If “AUTO” is not displayed even when the
DISPLAY button is pressed, perform the
procedure below to set the VIEWCAM to Full
Auto mode.
1 In Recording Standby mode, press the
MENU button until
appears. If “PIC.
EFF.” is not displayed above the D
button, press this button until “PIC. EFF.”
appears.
2 Press the MENU button until
ap-
pears. If “MAN’L FOCUS” is displayed,
press the D button to change it to
“FOCUS”.
4 If “EXPOSURE” is displayed in yellow,
press the EXPOSURE button (
) to
display the exposure setting screen,
then press the AUTO button (B).
• The exposure setting screen turns off
and “EXPOSURE” returns to blue.
5 Press the MENU button until
appears. If “SCENE MENU” is not
displayed above the A button, press
this button until “SCENE MENU”
appears.
6 Press the DISPLAY button.
• The Operation button indicators
disappear, and “AUTO” is displayed on
the screen.
3 If “WHITE BAL.” is displayed in yellow,
press the WHITE BAL. button (A).
•“WHITE BAL.” returns to blue.
BAL.
WH I T E
SUREFOCUS
BAL.
WHI TE EXPO
Blue
Full Auto mode indicator
FOCUS
MAN’ L
SUREFOCUS
BAL.
WHI TE EXPO
B/W
EFF
GAMA
REW
QK
EFF
PIC
EFF
Blue
EXI TAUTO
EXPOSURE
SURE
EXPO
SUREFOCUS
BAL.
WHI TE EXPO
AUTO
AUTO
SPORT
TLE
TI
-
TURN
RE
-
16 9
MENU
SCENE