PORTUGUÊS VL-A111S ESPAÑOL CAMCORDER CON PANTALLA DE CRISTAL LÍQUIDO CAMCORDER COM VISOR DE CRISTAL LÍQUIDO LIQUID CRYSTAL DISPLAY CAMCORDER ENGLISH PAL MANUAL DE MANEJO MANUAL DE OPERAÇÃO OPERATION MANUAL
This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/ EWG und 73/23/EWG mit Änderung 93/68/EWG. Ce matériel répond aux exigences contenues dans les directives 89/ 336/CEE et 73/23/CEE modifiées par la directive 93/68/CEE. Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/ 23/EEG, gewijzigd door 93/68/EEG. Dette udstyr overholder kravene i direktiv nr.
Before using the VIEWCAM, please read this operation manual carefully, especially page i. OPERATION MANUAL WARNING TO PREVENT SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. ENGLISH CAUTION To prevent shock, do not open the cabinet. No user serviceable parts inside. Refer servicing to qualified dealer or service centre. This equipment should be used with the recommended AC adapter or battery pack. CAUTION To prevent electric shocks and fire hazards, do NOT use any other power source.
Precautions • When the VIEWCAM is not in use, remember to remove the cassette tape, turn off the power, and disconnect the VIEWCAM from the power source. • Always respect prohibitions or restrictions on the use of electronic equipment on commercial flights or in other sensitive areas. • Do not aim the lens at the sun. Do not allow direct sunlight to strike the VIEWCAM lens or LCD monitor screen, whether or not recording is in progress, as it may damage the CCD sensor or LCD screen surface.
AC Adapter • The AC adapter may interfere with reception if used near a radio. • Prevent flammables, liquids, and metal objects from entering the adapter. • The adapter is a sealed unit. Do not attempt to open or modify it. • Do not damage, drop, or subject the adapter to vibration. • Do not leave the adapter in direct sunlight. • Avoid using the adapter in humid or extremely hot places. Cleaning • Many plastic parts are used in the VIEWCAM casing.
Supplied Accessories iii Battery pack BT-H22 AC adapter Power cord Audio/video cable CR2025 type lithium battery Shoulder strap Lens cap Sun hood
Optional Accessories Standard type battery pack BT-H22 Extended type battery pack BT-H32 iv
Contents Operation Summary Part Names .......................................................... 3 Quick Reference Index ........................................ 5 Warning Indicators ............................................... 6 Preparation Inserting and Removing the Battery Pack ........... 7 Charging the Battery Pack ................................... 8 Powering the VIEWCAM from an AC Outlet........... 9 Inserting and Removing a Cassette ..................
Playback Useful Features Advanced Features Useful Information .............................................. 51 Demonstration Mode .......................................... 55 Before Requesting Service ................................ 56 Specifications ..................................................... 58 Basic Operations References Basic Operations Digital Picture Effects ......................................... 41 Scene Menu (Program AE) ................................
Operation Summary Operation Summary Part Names For details on the use of each part, refer to the page number indicated in the brackets. Front view Terminal cover Microphone Zoom lens VIDEO jack [pp. 23, 50] AUDIO jack [pp. 23, 50] DC IN jack [pp. 8, 9] Speaker When the cassette compartment door is open Cassette holder [p. 10] Lens hood [p. 33] Shoulder strap loop [p. 17] Lithium battery holder [p. 11] Cassette compartment door [p. 10] 3 Cassette compartment door release [p.
Operation Summary Rear view RECord START/STOP button [p. 19] Power Zoom Wide angle/ Telephoto control [p. 20] VOLume control [p. 22] LCD monitor screen Shoulder strap loop [p. 17] FADE button [p. 29] CHARGE indicator [p. 8] MENU button [p. 25] Hand strap [p. 17] Power switch (CAMERA/VCR select switch) [pp. 19, 22] Operation buttons [p. 25] DISPLAY button [p. 25] Bottom view Battery compartment door release [p. 7] Battery compartment door [p.
Operation Summary Operation Summary Quick Reference Index This index lists some example uses of the VIEWCAM’s features. • To quickly return the tape to the end of the last recorded scene after playback. —See page 28 (Quick Return) • To locate the point on the tape where to begin recording while in Camera mode. —See page 28 (Edit Search) • To quickly check what you have just recorded. —See page 30 (Quick Review) • To record a backlit subject.
Operation Summary Warning Indicators Displayed for the first 3 seconds Displayed after 3 seconds Description of warning The video cassette is defective and should be removed (see page 10). Dew has formed inside the VIEWCAM. Wait for a few hours until the dew disappears (see page 52). About 10 seconds after this warning appears, the VIEWCAM automatically turns off. The battery is almost depleted. Replace it with a fully charged battery pack (see page 7).
Preparation Preparation Inserting and Removing the Battery Pack 4 Close the door, pressing it firmly in the centre until it clicks. Inserting the Battery Pack Preparation 1 Make sure that the Power switch is set to OFF. Removing the Battery Pack Power switch 2 Slide the battery compartment door release on the bottom of the VIEWCAM in the direction of the arrow to open the battery compartment door.
Charging the Battery Pack Power switch 1 Insert the battery pack into the VIEWCAM (see page 7). Make sure that the Power switch is set to OFF. • The battery pack will not charge when the Power switch is set to CAMERA or VCR. 2 Connect the power cord to the AC adapter, then insert the AC plug into a power outlet. 3 Open the terminal cover on the VIEWCAM and insert the DC plug of the AC adapter into the DC IN jack on the VIEWCAM. • The CHARGE indicator will light up in red. Max.
Preparation Powering the VIEWCAM from an AC Outlet Caution: Preparation • The supplied AC adapter is specially designed for use with this VIEWCAM, and should not be used as a power supply for other camcorders. Cautions: • BEFORE REMOVING THE DC PLUG, ALWAYS STOP THE TAPE AND TURN THE POWER OFF. If you remove the DC plug during recording or playback, the tape will remain wound around the video head drum, potentially causing damage to the tape.
Inserting and Removing a Cassette Inserting a Cassette Wait for the cassette holder to fully retract. Close the compartment door by pressing the centre until it clicks into place. Supply power to the VIEWCAM, then slide the release and open the cassette compartment door. Preparation 1 4 • The cassette holder extends and opens automatically. Cassette compartment door release Removing a Cassette Perform step 1 above, then take out the cassette.
Preparation Installing the Lithium Memory Battery 5 Close the cassette compartment door by pressing the centre until it clicks into place. Preparation The supplied lithium battery is used to store the memory of the date and time settings. 1 Slide the cassette compartment door release and open the cassette compartment door. Cassette compartment door release Removing the Lithium Battery Perform steps 1 and 2 above, then lift out the battery from the battery holder.
Selecting the Language for the On-screen Display This VIEWCAM allows you to choose from among English, German or French for the onscreen display language. Changing the Language In Recording Standby mode, press the appears. MENU button until 2 Press the PAGE (SEITE or PAGE) button ( ) to display MENU 1. 3 Press the 쑽 or 쒀 button (Q) to select “LANGUAGE” (“SPRACHE” or “LANGUE”), then press the SET (EINST. or REGLAGE) button (B) (W). Power switch • The language selection screen appears.
Preparation English On-screen Displays The following on-screen displays appear when “ENGLISH” is selected as the on-screen display language (see page 12). Preparation Camera Mode PIC EFF GAMA Q K EFF REW MENU 1 NORMAL ON OFF F ADE REMOT E DEMO MODE L ANGUA GE COUNTER SET P I CTURE PAGE MENU 2 FOCUS WH I T E EXPO SURE BA L.
German On-screen Displays The following on-screen displays appear when “DEUTSCH” is selected as the onscreen display language (see page 12). Preparation Camera Mode GAM- DUR E F F . CHS. B I LD ME N Ü MENÜ 1 F ADE FE RNBDG. DEMO- B E TR. S PRACHE Z Ä HL WERK NORMAL E IN AUS E I NSE I ST. B I LD TE MENÜ 2 FOKUS WE I SS BEL I ABGL . CHTG DATUM / UHRZ E I T ANZ E I GE AUS DATUM+ UHRZ. WÄ HL EN 1 1 2002 E I NS T . 0 00 2 4H 12H / 24H 5 TITEL SE I E I NST.
Preparation French On-screen Displays The following on-screen displays appear when “FRANÇAIS” is selected as the onscreen display language (see page 12). Preparation Camera Mode MENU IMAGE E FF. R EVU G AMM RAP. MENU 1 FONDU T E L E COM. MODE DEMO L ANGUE COMP T EUR NORMAL ON OFF REGLAGE IMAGE PAGE MENU 2 FOCUS EXPO BAL. BL ANC S I T .
Setting the Date and Time 4 Example: Setting the date to 2 June 2003 (2. 6. 2003) and the time to 10:30 am (10:30). S E T T I NG 5 Power switch Press the 쑽 or 쒀 button to select “6” (month), and press the SET button. S E T T I NG 6 7 DISPLAY button 1 2 8 2 6 2003 0 00 Press the 쑽 or 쒀 button to select “10” (hour), and press the SET button. S E T T I NG Lock button Hold down the Lock button and slide the Power switch to CAMERA.
Preparation Using the Hand Strap and the Lens Cap 1 Open the hand strap flap (Q) and grip strap (W). Preparation Hand strap flap Notes: • Always replace the lens cap on the lens when the VIEWCAM is not in use. • Attach the lens cap to the hand strap so it will not get in the way during recording. Grip strap Attaching the Shoulder Strap 2 Pass your hand through the hand strap and put your thumb close to the Power Zoom control.
Using the Sun Hood It is recommended that you use the supplied sun hood when recording outdoors on a sunny day or at a brightly illuminated location. Closing the Sun Hood 1 Fold in both side covers while holding the top cover open. 2 Close the top cover by gently pressing the mark down until the cover clicks into place. Preparation Attaching the Sun Hood Fit the bottom clip on the sun hood into the slot below the LCD screen (Q), and align the top clip with the ridge above the LCD screen (W).
Basic Operations Camera Recording Easy Camera Recording with Full Auto Mode Before you start recording, perform the operations described on pages 7 through 18 to prepare your VIEWCAM for recording. REC START/STOP button Note: • When recording at the beginning of a tape, advance the tape about 15 seconds before you begin recording. This will prevent the beginning of the recording being cut off when it is played back. To Pause Recording Press the REC START/STOP button again.
Zooming Tips on Recording Positions Zooming allows you to move visually closer to or farther from a subject without physically changing your position. The rotating LCD monitor screen lets you enjoy easy video recording in a more relaxed posture without having to hold the VIEWCAM up to your eye. The LCD monitor also makes it easier to record high-angle and low-angle shots.
Basic Operations Camera Recording Basic Operations Camera Recording Remaining Recording Time Display Remaining Battery Power Display When the VIEWCAM is recording in Camera mode, about 10 minutes before the tape reaches the end, an on-screen indicator displays the approximate remaining recording time. When using the VIEWCAM with the battery pack as the power source, you can turn on and off the remaining battery power display by pressing the DISPLAY button.
Basic Operations Playback Playback To Stop Playback The LCD monitor screen makes it possible to play back and see what you have just recorded. Nothing needs to be connected, allowing instant on-screen playback with the sound through the built-in speaker. Power switch LCD monitor screen Press the STOP button (A). REW P L A Y F F S T OP S T I L L Note: • If you wish to turn the Operation button indicators on or off, press the DISPLAY button.
Basic Operations Playback Watching the Playback on a TV 3 • When connecting to a TV via a VCR, turn on the VCR and set it to the “AV” or “LINE” input channel. Operate the TV as you normally do to see the signal from the VCR. (See the operation manuals of your TV and VCR.) You can also connect the VIEWCAM to a TV to allow a larger audience to enjoy video playback. 1 Lift up the terminal cover on the VIEWCAM (Q) and rotate it to the right (W). Turn on the TV and set it to the “AV” or “VIDEO” channel.
Video Search Still The video search function makes it easy to search for a desired scene on the tape. The still function makes it possible to pause playback. Searching for a Scene Near the Current Tape Position During playback, press the STILL button ( ). 1 During playback, press the Forward Search (B) (or Reverse Search [C]) button. REW P L A Y F F S T OP S T I L L • The playback picture fast forwards (or reverses).
Useful Features Useful Features Operations of the On-screen Controls Selecting the Mode/Menu Screens Using the Control Buttons You can use the mode screens to select various functions and the menu screens to adjust various settings. Follow the procedure below to display the mode/menu screen with the indicator of the desired function/setting. The following buttons on the VIEWCAM can be used to control the various functions, settings and on-screen displays.
Adjusting the Menu Settings 5 Press the SET button (B) to select the desired setting. • Each time you press the SET button, the setting changes. Follow the procedure below to adjust the desired menu settings. Example Camera mode MENU 1 1 Hold down the Lock button and slide the Power switch to CAMERA. 2 Press the MENU button until appears.
Useful Features Recording the Date and Time When “AUTO” is selected, the date/time is displayed and recorded for 10 seconds at the beginning of the first recording of each day. When “ON” is selected, the date/time is continuously displayed and recorded. When “OFF” is selected, the date/time is neither displayed nor recorded. Follow the procedure shown below to record the date and time, or the date only, along with the subject.
Quick Return Edit Search When you have been playing back what you have recorded, and wish to quickly return to recording again from the end of the last recorded scene, use the quick return function. The edit search function lets you search, without switching from Camera mode to VCR mode, for the point on the tape where you wish to start recording next. 1 In Recording Standby mode, press the appears. MENU button until T I - RE SCENE T L E TURN 1 6 9 MENU 2 Press the RETURN button (D).
Useful Features Fade In and Fade Out The fade function allows you to gradually bring the image and sound in or out at the beginning or end of a scene to create a scene transition. This VIEWCAM features one normal and two animated fade modes. Selecting Fade Mode 1 In Recording Standby mode, press the (MENU 1) MENU button until appears. MENU 1 F ADE REMOT E DEMO MODE L ANGUA GE Type of Fade Modes NORMAL: The picture fades in from and out to white.
2 Press the REC START/STOP button to begin recording. Quick Review • The picture and sound fade in with the selected fade mode. The quick review function lets you check the last 5 seconds of tape just recorded without switching to VCR mode, to make sure that the recording has come out right. 1 In Recording Standby mode, press the appears. MENU button until HA PPY B I R THDAY ! PIC EFF F ADE 2 GAMA QK REW EFF Press the QK. REW button ( ).
Useful Features Gamma Brightness Compensation To obtain a brighter picture Press the GAMA EFF. button (A) again. • The When the subject is backlit, the image will be darkened if it is recorded normally. The gamma brightness compensation function improves the picture by increasing the brightness of the subject while leaving the brighter portions of the image unaffected. 1 2 GAMMA GAMA Q K EFF RE REW Press the GAMA EFF. button (A) once.
Gain-up (Cat’s Eye) To cancel the gain-up function When you are recording in a dark or poorlyilluminated location, “LIGHT” is displayed on the screen. Use the gain-up function to record a brighter picture. 1 2 Press the MENU button until appears (Camera mode). Press the GAMA EFF. button (A) once. Press the GAMA EFF. button until “GAMMA” disappears. Notes: • The Gain-up mode will disengage and the indicator will disappear automatically if the VIEWCAM is moved to a bright location.
Useful Features Wide Screen (16:9) Macro Shots The wide screen function lets you record scenes with the wide-screen feel of a movie shown in a theatre. The top and bottom of the picture are masked with black bands to produce an effective screen aspect ratio of 16:9. This VIEWCAM lets you shoot close-up images of small objects such as flowers and insects, or make title frames for your videos. When you want to record a magnified image of a subject which is within approximately 1.
Setting the VIEWCAM to Full Auto Mode 4 This VIEWCAM is equipped with auto focus, auto white balance, and auto exposure functions. For easy, high-quality camerarecording, record subjects in Full Auto mode. If “EXPOSURE” is displayed in yellow, press the EXPOSURE button ( ) to display the exposure setting screen, then press the AUTO button (B). • The exposure setting screen turns off and “EXPOSURE” returns to blue.
Useful Features Self Recording The LCD monitor can be rotated 180° vertically so that the monitor screen faces the subject. This lets you record yourself while watching your image on the screen. You can enjoy recording a portrait of yourself, or recording yourself and your friends together at a party. 3 Push the Power Zoom control to obtain the desired angle of view. 4 Press the REC START button (B) to begin recording. ME S SAGE REC S TART To pause recording, press the REC STOP button (B).
3 Self-recording Message In Self Recording mode, you can record a short video message for somebody. This feature is convenient for editing video letters. • Complete steps 1 to 3 of “Normal Self Recording” on page 35, then perform the procedure below. When the remaining recording time reaches 5 seconds, “EXTEND” will begin flashing. • When you want to extend the recording time, press the EXTEND button (A) within 5 seconds. You may record continuously for 10 more seconds.
Useful Features Tape Counter Feature Camera mode The tape counter shows elapsed playback or recording time in hours, minutes and seconds. (The counter continues to count internally even while it is not being displayed.) This feature can be set and used in both VCR and Camera modes. Using the Counter Press the MENU button until appears. SEARCH GAMA COUE F F . NT ER 2 Press the COUNTER button (D) to display the tape counter. Tape counter 0 11 20 GAMA COU - MEM- RE - SE E F F .
Using the Counter Memory 5 Press the REW button (C). • The tape will automatically stop when the counter reaches 0:00.00. Use the counter memory feature when you want to return to the beginning of a particular scene. The position where the counter was reset (0:00.00) is stored in memory to make it easier to return to that point on the tape. VCR mode 1 M 0 11 24 REW P L A Y F F S T OP S T I L L REW P L A Y F F S T OP S T I L L During playback, press the MENU appears.
Useful Features 3 Program Search Press the REW (C) (or FF [B]) button. • The tape rewinds (or fast forwards) to the beginning of a scene immediately before (or after) the current tape position; playback then starts automatically. The program search function automatically finds and plays back the beginning of a number of previously recorded scenes. Up to 10 different scenes can be found on one tape.
Using the Remote Control (Not supplied) The remote control (RRMCG0085TASA) is not supplied with this VIEWCAM. Contact the nearest SHARP service centre or your dealer for purchasing as a specified part. Operating the Remote Control Aim the remote control at the remote sensor of the VIEWCAM, and press the control buttons for operation. Remote sensor 1 2 Open the battery compartment cover. Insert the two commercially available AA (R6 or UM/SUM-3) batteries with the battery poles positioned as indicated.
Advanced FeaturesFeatures Advanced Digital Picture Effects To cancel the digital picture effect These digital picture effects let you record the subject with a more dramatic effect. Type of Digital Picture Effects B/W EFF.: The picture is recorded in blackand-white. SEPA EFF.: The picture is recorded in sepia colour similar to that of an old photograph. SOLARI: The contrast of the subject is enhanced, creating a unique artistic image. NEGA EFF.
Scene Menu (Program AE) You can set the VIEWCAM to the shooting mode that will create the best results for a specific type of shooting situation. Just select one of the four scene settings shown below. The VIEWCAM will automatically set the exposure, white balance, and shutter speed to produce the optimum picture quality for the selected situation. Type of Scene Settings SPORT: When you want to record a fastmoving subject. SUNLIGHT: When the background is very bright.
Advanced Features 3 Superimposing a Title Use the title feature to superimpose titles on your videos when recording. There are eight titles preset for your convenience which you can choose from. 1 Press the or button (Q) to select the desired title, then press the SET button (B) (W) to superimpose it. SET In Recording Standby mode, press the appears.
4 Changing the Preset Titles You can make a new title of your own by changing any of the eight preset titles. The maximum number of title characters is fifteen. • The selected character will appear at the top of the screen and the cursor will automatically move to the right. Example: Changing “WEDDING DAY” to “IN HAWAII”. 1 Press the MENU button until appears, and then press the TITLE button (C) to display the title selection screen.
Advanced Features Auto/Manual Focus 1 In Recording Standby mode, press the MENU button until appears. Auto Focus The auto focus function is designed to focus on most types of subjects. In Auto Focus mode, the VIEWCAM automatically focuses on whatever is in the centre of the scene. Always keep the subject in the centre of the screen. 2 Notes: • If no subject is in the centre of the screen, the focus area will expand and the subject nearest the centre will be focused on.
3 White Balance Lock • “WHITE BAL.” changes from blue to yellow and begins flashing. The colour of the subject on the screen tends to look different depending on the lighting condition. The VIEWCAM is preset to Auto White Balance mode, which automatically adjusts the hue of the picture for the current lighting condition. The auto white balance may not work properly for the following subjects. In this case, use the white balance lock function.
Advanced Features 3 Manual Exposure Press the or button to select the desired exposure level. • The bar indicates the selected exposure The VIEWCAM is preset to Auto Exposure mode, which automatically chooses the optimal aperture. When there is too much contrast in brightness between the subject and background, however, you may not be able to record a clear image. In this case, use the manual exposure function to correct the exposure level. level.
3 Picture/Backlight Adjustments Press the or button to adjust the picture or backlight to the desired setting. If the monitor picture is difficult to see due to ambient lighting, etc., adjust the picture settings. This feature can be adjusted in both Camera and VCR modes. • The example screens for this feature are for Camera mode. 1 Press the MENU button until (Camera mode) or (VCR mode) appears. SET 2 P I CTURE PAGE Press the PICTURE button ( ) to display the adjustment screen.
Advanced Features Gamma Playback The gamma playback function improves the picture by increasing the brightness of the subject while leaving the brighter portions of the image unaffected. 1 During playback, press the MENU button until appears. GAMA COUE F F . NT ER 2 SEARCH Turning Off the LCD Monitor Backlight The LCD monitor uses a fluorescent lamp for backlighting (see page 53). In order to reduce battery consumption, you can turn off the lamp when backlighting is not necessary (e.g.
Editing Cutting Unwanted Sequences Video editing lets you refine your videos by removing unwanted sequences from your tape, or transposing one sequence with another. This VIEWCAM lets you monitor the source program on the built-in LCD monitor without having to connect it to an external TV or video monitor. Connect the VIEWCAM to a VCR with the supplied audio/video cable, as shown.
References References Useful Information Hints for Better Shooting • Position the subject in the centre of the screen. When you are using auto focus, whatever is in the centre of the screen is kept in focus. Lighting For clear, good-quality recording, 500 to 100,000 lux is needed. Recording is possible with less light, but the picture quality may suffer. Adequate lighting is also essential for correct white balance. Brightness (Lux) Situation (Lux) Blue sky 100,000 ○ Position the subject in the centre.
Dew Formation • What is “dew formation”? When cold water is poured into a glass, dew drops form on the glass. This clinging of water drops is called dew formation. • When dew forms in your VIEWCAM. Dew will gradually form on the head drum of your VIEWCAM and make the video tape stick to the head. This causes damage both to the head and the tape. When dew formation occurs, recording and playback may not function properly.
References Replacing the Fluorescent Lamp This VIEWCAM uses a fluorescent lamp to backlight the LCD monitor. If the monitor becomes dark or difficult to view, the fluorescent lamp may need to be replaced. Contact the nearest SHARP service centre or your dealer for further advice. Battery Pack Battery pack consumption • Recording with many starts and stops, frequent zooming, and recording in low temperatures will shorten actual recording times. Accordingly, be sure to turn off the power when not recording.
Video Cassette Tapes Use only tapes with the VIEWCAM. mark with this To protect recordings against erasure When a previously recorded cassette is used again for recording, the previously recorded material is erased. To protect a recording against accidental erasure, slide the tab on the cassette to cover the opening. (A red mark will be exposed.) To record, slide the tab to open the opening.
References Demonstration Mode Cancelling Demo Mode You can watch a brief demonstration of the special VIEWCAM features in Demo mode. If the demonstration appears on the screen when you turn on the VIEWCAM for the first time, cancel the Demo mode to use your VIEWCAM. 1 During the demonstration, perform step 3 above. 2 Press 쑽 or 쒀 button (Q) to select “DEMO MODE”, then press the SET button (B) (W) to select “OFF”.
Before Requesting Service Before calling for service, please check the following troubleshooting table. Symptom Power No power. CAMERA mode REC START/STOP button does not work. Suggested solution Power source is not properly connected. Connect power source properly (pp. 7, 9). Battery pack is not charged. Charge battery pack sufficiently (p. 8). Dew in VIEWCAM. Wait until dew dries (p. 52). Safety function is in effect.
References VCR mode Symptom Suggested solution Cannot play back, rewind Position at beginning or end of tape. or fast forward tape. Rewind or fast forward tape to desired point (p. 22). Video noise in image. Dirty video heads. Call for service. Old or worn tape. Use a new cassette. Power source is not properly connected. Connect power source properly (pp. 7, 9). Battery pack is not charged. Charge battery pack sufficiently (p. 8). VIEWCAM is recording. Stop tape and try again (p. 19).
Specifications VIEWCAM Signal System: Recording System: Cassette: Recording/Playback Time: Tape Speed: Pickup Device: Lens: Lens Filter Diameter: Monitor: Microphone: Colour Temperature Compensation: Minimum Illumination: Video Output Level: Audio Output Level: Speaker Output: Power Requirement: Power Consumption: Operating Temperature: Operating Humidity: Storage Temperature: Dimensions (approx.): Weight (approx.
Notes
SHARP CORPORATION Impreso en Malasia Impresso na Malásia Printed in Malaysia TINSL0313TAZZ 02P01-M-G
