System information

Product Release Notes
This page includes recent changes or improvements that have been made to this
product. These changes may affect its operation or physical installation in your
application. Please read the following information.
Rev 5 Release
• BIOS. Shipped with BIOS version 4.1.115 and later. See the VSBC-6 support web page for current
BIOS release information.
• CPU. Designed to support the Intel Tillamook chip.
Rev 4 Release
• BIOS. Shipped with BIOS version 4.1.107 and later. See the VSBC-6 support web page for current
BIOS release information.
• System RAM. supports 3.3 volt SDRAM modules (PC-66 and PC-100) and EDO RAM modules.
• CPU Fan Power Connector. Connector J13 has been changed to a polarized style and has been
moved to a better location.
Rev 3 Release
• BIOS. Shipped with BIOS version 4.1.103 and later. BIOS version 4.1.103 solved a Windows NT 4.0
boot problem.
• System RAM. Requires 3.3 volt EDO RAM modules. SDRAM is not supported in this release. System
will beep continuously if powered up with SDRAM in place.
• Power Connector. Connector J4 was changed to a straight (vertical) connector on Rev. 3 boards. This
configuration will be maintained on future versions.
• IDE Interface. Designed to support newer high speed IDE Type 4 and Ultra DMA drives. Not fully
compatible with IDE Type 0-3 drives. See VSBC-6 support web page for additional information.
Rev 2 Release
• BIOS. Shipped with BIOS version 4.1.100 and later.
• System RAM. Requires 3.3 volt EDO RAM modules. SDRAM is not supported in this release. System
will beep continuously if it is powered up with SDRAM in place.
Rev 1 Release
• Pre-production only. No customer releases.
Support Page
The VSBC-6 Support Page, at http://www.versalogic.com/private/vsbc6support.asp, contains
additional information and resources for this product including:
• Reference Manual (PDF format)
• Operating system information and software drivers
• Data sheets and manufacturers’ links for chips used in this product
• BIOS information and upgrades
• Utility routines and benchmark software
Note: This is a private page for VSBC-6 users only. It cannot be reached through our web site. You must
enter this address directly to find the support page.