System information

Windows 98 Installation
10 – Configuration / Operation VSBC-6 Reference Manual
Windows 98 Installation
Because of the industrial nature of the VSBC-6, a "Custom" installation of Windows 98 is
recommended. Addition of ethernet and video drivers are accomplished after the operating
system is fully installed.
I
NSTALLATION OF WIN98 OPERATING SYSTEM
1. Start out with a VSBC-6 with attached floppy drive, hard drive, and CD-ROM drive.
Make sure no PC/104 expansion modules are installed.
2. Install DOS on your hard drive. Include drivers so your CD-ROM can be accessed.
3. Run the setup program on the Win98 CD-ROM.
4. On the "Setup Options" dialog box, select the following:
 Typical
 Portable
 Compact
: Custom
5. Wait for installation process to complete.
I
NSTALLATION OF
W
IN
98 E
THERNET
D
RIVERS
1. With Win98 running, insert Ethernet Drivers disk into the floppy drive.
2. Start|Run|A:\EXTRACT.BAT
Note: This will copy files from the floppy disk to C:\VSBC-6\NET
3. Start|Settings|Control Panel|Add New Hardware
4. On the "Add New Hardware Wizard" dialog box, select the following:
 Yes (recommended).
: No, I want to select hardware from the list
5. On the "Hardware Types" list, highlight Network Adapters
6. Click on the "Have Disk" button
7. Navigate to the c:\vsbc-6\net\ndis3-4\ndis4
\lan-only directory
8. Highlight NET9000.INF. Click "OK".
9. On the "Select Device" dialog box, highlight LAN9000 Ethernet Adapter (ISA)
10. Drivers will load from the Win98 CD-ROM
11. At the 99% mark, the system will stop because it cannot find a file. Press the down arrow in
the "Copy File From" list box. Select c:\vsbc-6\net\ndis3-4\ndis4\lan-only. Press OK.
12. After reboot you will get an error message stating that LAN9000 is not setup properly.
IGNORE THIS ERROR MESSAGE.
13. Start|Settings|Control Panel|Network
14. Select "Configuration" tab and highlight LAN9000 Ethernet Adapter (ISA)
15. Press the "Properties" button.
16. Select "Resources" tab.
17. Change the address and IRQ to the following:
I/O address range = 340 – 35F
Interrupt (IRQ) = 11
18. Enter your computer and network identification information, including adding
appropriate network protocols and/or services, TCP/IP information, etc.