System information

Windows 95 Installation
VSBC-6 Reference Manual Configuration / Operation – 9
I
NSTALLATION OF
W
IN
95 E
THERNET
D
RIVERS
1. With Win95 running, insert Ethernet Drivers disk into the floppy drive.
2. Hold the ALT key down and right click on the "My Computer" icon. Note the version of
Windows you are running. You will need this information for step #8.
3. Start|Run|A:\EXTRACT.BAT
Note: This will copy files from the floppy disk to C:\VSBC-6\NET
4. Start|Settings|Control Panel|Add New Hardware
5. On the "Add New Hardware Wizard" dialog box, select the following:
 Yes (recommended).
: No
6. On the "Hardware Types" list, highlight Network Adapters
7. Click on the "Have Disk" button
8a. For Windows 95 version 4.00.950 or 4.00.950a
Navigate to the c:\vsbc-6\net\ndis3-4\ndis3
\lan-only directory
8b. For Windows 95 version 4.00.950b
Navigate to the c:\vsbc-6\net\ndis3-4\ndis4
\lan-only directory
9. On the "Select Device" dialog box, highlight SMC 9000 Ethernet Adapter
10. Enter your computer and network identification information, including adding
appropriate network protocols and/or services, TCP/IP information, etc.
11. Select "Configuration" tab and highlight SMC 9000 Ethernet Adapter
12. Press the "Properties" button.
13. Select "Resources" tab.
14. Change the address and IRQ to the following:
I/O address range = 340 – 35F
Interrupt (IRQ) = 11