System information

Physical Details
EPM-15 Reference Manual 18
EPM-15 CONNECTOR FUNCTIONS AND INTERFACE CABLES
Table 1 provides information about the function, mating connectors, and transition cables for
EPM-15 connectors. Page num
bers indicate where a detailed pinout or further information is
available.
Table 1: EPM-15 Connector Functions and Interface Cables
Connector Function Mating Connector
Transition
Cable
Cable Description Pin 1 Location
1
x coord. y coord.
Page
J1 Video Output FCI 89361-712 or
FCI 89947-712
CBR-1201 1’ 12-pin 2mm latching /
15-pin HD D-Sub VGA
3.047 1.937 32
J2 PC/104-Plus (PCI) AMP 1375799-1 — — 0.450 3.139 15
J3
2
PLD Reprogram-
ming Port
— — — — — —
J4
Ethernet RJ-45
— — 3.100 2.637 36
J5
LPT port FCI 89947-720
CBR-2003 1’ 20-pin 2mm latching
IDC / 25-pin F D-Sub
-0.385 2.437 31
J6 CompactFlash Type I or Type II
CompactFlash
— — 1.100 2.017 —
J7 IDE Hard Drive
Channel 1
FCI 89947-144 CBR-4406
3
1’ 44-pin 2mm latching /
two 44-pin 2mm
3.303 1.937 27
J8 COM ports, USB
ports, DB-9, timer
inputs, push-button
reset, PC speaker,
LED
FCI 89361-350LF CBR-5009A 50-pin standard I/O
cable to breakout board
CBR-5010
3.551 2.172 29
J9 Main Power Input Berg 69176-010 (housing)
+ Berg 47715-000 (pins)
CBR-1008 Interface from standard
ATX power supply
0.275
4
-0.075 22
J10 PC/104 (ISA) AMP 1375795-2 — — 0.050 0.200 15
J11
2
Process JTAG
DBUG
2mm — — — — —
J12 LVDS Molex 51146-2000
(housing)
Molex 50641-8041 (pins)
CBR-2010 or
CBR-2011
18-bit TFT FPD using
20-pin Hirose conn. or
18-bit TFT FPD using
20-pin JAE conn.
-0.277 1.236 33
J13 Audio FCI 89947-708LF or
FCI 89361-708LF
CBR-0803 12" latching 8-pin 2mm
to two 3.5mm stereo
audio
-0.129 2.909 37
1. The PCB Origin is the mounting hole to the lower left, as shown in Figures 8.
2. Connector not shown in drawings.
3. CBR-4405 44-pin to 40-pin adapter required to connect to 3.5-inch IDE drives with 40-pin connectors.
4. The J9 pin-1 coordinates for board revision 4.xx and earlier are x = 0.205, y = -0.068. The connector was
moved slightly in revision 5.00 to match the position of the VL-EPM-5 power connector.