Specifications
26
Basic Operations
Basic Operations
Still Recording
You can record still images with operation similar to that of
film cameras. Before you start recording, see pages 14
through 20 to prepare your Digital Recorder.
Precaution:
• Do not try to record images with low battery power. It may
cause malfunctions.
1 Slide the POWER switch (1), set the Mode select
switch to STILL (2) and then rotate the lens body
toward CAMERA (3).
PLAY
CAMERA
2
1
3
POWER
MOVIE STILL
2 Adjust the angle of the lens body to compose the
image on the LCD monitor.
NORMAL REM 18
OCT.27.2‰‰‰
1‰:31 AM
NORMAL REM 18
OCT.27.2‰‰‰
1‰:31 AM
STILL mode indicator
Remaining number
3 Press the Shutter button to record the image.
NORMAL REM 17
OCT.27.2‰‰‰
1‰:31 AM
Notes:
• If the warning indicator “NOT INITIALIZED” appears, format
the SmartMedia card by the Digital Recorder (see page 64).
• The Digital Recorder automatically chooses the correct shutter
speed for the lighting conditions. Note that the slow shutter
speed set for the poor lighting may cause small image shakes.
And the image on the LCD monitor will be adversely affected.
• Using the Digital Recorder under fluorescent lights, mercury
lamps or sodium-vapour lamps causes flashs on the recorded
images. Sometimes those lightings affect tint of the images.
• The Still Recording mode is factory preset to NORMAL. If
you want to record still images in higher picture quality,
change the mode to FINE (see page 46).