Specifications

17
Preparations
Preparations
4 Close the battery compartment cover (1), hold
down the cover (2) and slide it in the direction of
the arrow (3) until it clicks.
1
3
2
Note:
• Press and slide the battery cover until it is closed securely, or
the batteries push up the cover.
Removing a SmartMedia card
Pull out the SmartMedia card in step 3 above.
Notes:
• Be careful not to drop the batteries when opening the battery
compartment cover.
• Do not use a 5 V SmartMedia card. Use the supplied
SmartMedia card or a commercially available card, which is
3.3 V type.
Inserting and Removing a
SmartMedia Card
This Digital Recorder uses a SmartMedia card for memory. It
will retain recorded images even if the batteries are depleted
or the power source is interrupted.
Inserting a SmartMedia Card
1 Make sure the power of the Digital Recorder is
turned off.
2 Slide the battery compartment cover (1) to open it
in the direction of the arrow (2).
2
1
3 Insert a SmartMedia card in the direction of the
arrow and push it in as far as it will go.
• Make sure that the Contact area is facing up and that
you insert the end with a chipped corner into the slot.
Contact area
Chipped corner