Operation Manual

GB-26
CUSTOMISED INSTALLATION
CHANGING THE ON-SCREEN DISPLAY LANGUAGE
Changing the language used by the on-screen display will not change the operation of the
VCR or make it suitable for any other broadcast standard.
1. Press MENU.
2. Press [K/L] to select SET UP. If the display is
not in a language you can understand, this is
the fourth option from the top. Press
SET to
confirm.
3. Press [K/L] to select LANGUAGE (the last
option).
4. Then press SET to confirm.
5. Press [K/L / H/J] to select your language. Then press SET to confirm. Press MENU to
return to a normal screen.
MANUALLY SETTING THE CLOCK
1. Press MENU. Press [K/L] to select SET UP.
Press
SET to confirm.
2. Press [K/L] to select CLOCK. Press SET to
confirm.
3. Press [K/L] to select either 12 or 24 hour
clock.
4. Press [H/J] to select TIME. Enter the time using the NUMBER BUTTONS or [K/L].
If the minutes are less than 10, enter the leading 0. If using the 12 hour clock enter AM or
PM by pressing on the remote control.
5. Press [H/J] to select DATE. Enter the date using the NUMBER BUTTONS or
[
K/L]. For example, for 1st April enter 01 04.
6. Press [H/J] to select YEAR. Enter the last two digits of the year using the NUMBER
BUTTONS or [K/L]. For example, for 2002 enter 02. For the year 2003 enter 03.
NOTE:
You will need to update the clock for daylight saving.
LANGUAGE
ENGL I SH SVENSKA
DEUTSCH NEDERLANDS
FRANÇA I S DANSK
I TAL I ANO NORSK
ESPAÑOL SUOMI
CLOCK
MODE T I ME DATE YEAR
24H 0:00 1/01 02
MODE : 24H / 12H
 : SELECT  : CHANGE
SET : ENTER MENU : EX I T