User Manual

52
If problems persist contact the SHARP Helpline on tel: [phone] (office hours)
or www.sharp.co.uk/support
VCR RESET
1. Press the STOP button on the front of the VCR.
2. Press and hold MENU and the CHANNEL ( / ] buttons together for 10 seconds.
✔
VCR RESET IS NOW COMPLETE
Please continue with your previous procedure.
RF CHANNEL TUNING
If you have a preferred RF output channel, this can be set manually (21-69) by following the
procedure below:
1. Press the STANDBY button.
2. Press and hold the MENU button on the VCR front panel for 3 seconds.
3. Wait for a flashing channel number to appear on the VCR display.
4. The channel number can now be changed by using the CHANNEL ( / ]
buttons.
5. Press the SET button to store.
6. Your TV will now require tuning to the new
channel.
(White text
blue background)
RF THROUGH ON/OFF:
If you wish to connect yhour VCR to the TV with only a scart lead, the RF Output on your VCR
can be turned OFF and ON by pressing the CLEAR button then the SET button on the
remote control at point 3 of the RF CHANNEL TUNING above. This will help minimise
interference.
VCR RF
SET : ENTER MENU : EX I T