User Manual

49
If problems persist contact the SHARP Helpline on tel: 08705-274277 (office hours)
or www.sharp.co.uk/support
MORE INFORMATION ABOUT YOUR VCR
SPECIFICATIONS
Specifications are subject to change without notice as part of our policy of
continuous improvement.
No liability is accepted for any inaccuracies or omissions in this publication,
although every possible care has been taken to make it complete and as
accurate as possible.
Format: VHS PAL/S-VHS/S-VHS ET standard
Number of heads: Six heads
Video signal system:: PAL colour or monochrome signal:
625 lines
Hi-Fi audio recording system: Deep layer recording system conforming to stereo
Hi-Fi VHS standard.
Maximum playing time: 240 min. with E-240 video cassette in Standard Play
(SP) mode
480 min. with E-240 video cassette in Long Play (LP)
mode
720 min. with E-240 video cassette in Extended Play
(EP) mode
Tape width: 12.7 mm
Tape speed: 23.39 mm/s Standard Play (SP):
11.70 mm/s Long Play (LP)
7,8 mm/s Extended Play (EP)
Antenna: 75 unbalanced
Reception channels: VHF channel A-J, UHF channel 21-69
RF output signal: UHF channel 21-69
Power requirement: AC 230V, 50 Hz
Power consumption: 19 W approx. (POWERSAVE 1.5W)
Operating temperature: 5 ˚C to 40 ˚C
Storage temperature: -20 ˚C to 55 ˚C
Video input: 1.0 Vp-p, 75
Video output: 1.0 Vp-p, 75
S-Video connections: IN/OUT
Audio input: Line1&2: -3.8 dBs, 10 kΩ, Line 3: -3.8 dBs, 47 k
Audio output: Line1&2: -3.8 dBs, 1 kAudio Out: -3.8 dBs, 1 k
Hi-Fi audio: Dynamic range:~ 90 dB typ. (SP);
Frequency response: 20 Hz - 20 kHz;
Wow and flutter: < 0.005% Wrm (JIS A)
Dimensions: 430(W) x 282.5(D) x 103.5(H) mm
Weight: 4 kg (approx.)
Supplied accessories: 75 RF Connection cable, operation manual,
remote control, AA/R6/UM3 battery (x2)