User Manual

13
If problems persist contact the SHARP Helpline on tel: [phone] (office hours)
or www.sharp.co.uk/support
BASIC OPERATION
IMMEDIATE RECORDING
S-VHS ET (EXPANSION TECHNOLOGY)
By selecting this function, your VCR will record a virtual S-VHS recording on a standard VHS
format tape. This will help increase picture quality. This function will only work when S-VHS in
the Mode Menu is selected to Auto and the VCR is in SP mode.
• High Grade tapes are highly recommended for
Super VHS E E T T recording.
• It is recommended that you mark your cassette with
Super VHS E E T T , if it has been recorded
in the
Super VHS E E T T format.
You can record the channel you are watching or a different channel.
1. Insert a video tape into your VCR.
2. Select the channel you wish to record on the VCR.
3. To start recording, press REC ().
4. To pause during recording, press PAUSE/STILL ().
5. To continue recording, press REC ().
6. To stop recording, press STOP ( ) once.
SIMPLE TIMED RECORDING
1. Insert a video tape into your VCR.
2. Select the channel you wish to record on the
VCR.
3. To start recording, press REC ().
4. To specify a stop time, press REC ().
5. Each additional press of REC ( ) will delay
the stop time by 10 minutes.
6. To stop recording at any time, press
STOP ( ) once.
NOTES:
• If the tape ends before the recording is complete the VCR will stop recording, rewind,
eject the tape and place the VCR into POWERSAVE/STANDBY mode, or just eject the
tape and place the VCR in POWERSAVE/STANDBY timer mode if the VCR is in timer
record mode.
• If the VCR ejects the video tape when you press
REC ( ) the tape is record
protected. i.e. record protection tab has been removed.
STOP 15:30