User Manual

12
If problems persist contact the SHARP Helpline on tel: 08705-274277 (office hours)
or www.sharp.co.uk/support
BASIC OPERATION
HOW TO PLAYBACK A VIDEO TAPE
FAST FORWARDING/REWINDING A VIDEO TAPE
1. Press STOP ( ) to stop the video tape.
2. Press FAST FORWARD ()/REWIND ( ) on the remote control or on the VCR
front panel.
3. To stop fast forward/rewind, press STOP ().
FORWARD/REVERSE VISUAL SEARCH
1. During playback for continuous search mode, press FAST FORWARD ()/
REWIND ( ) on the remote control, or on the VCR front panel.
2. To decrease the speed, press FAST FORWARD ( ) /REWIND ( ) on the
remote control or VCR front panel again.
3. Press PLAY/X2 ( ) to resume playback.
NOTE:
IMMEDIATE RECORDING
SELECTION OF A CHANNEL
Select the channel by using the number buttons on the remote control, or select the
next/previous channel by pressing CHANNEL [or].
To change between single digit and 2-digit channel numbers, press AM/PM .
For example, for channel 24, press AM/PM then press 2 4.
TAPE SPEED SELECTION
Your VCR has three tape speeds: SP (Standard
Play), LP (Long Play) and EP (Extended Play). Press
the TAPE SPEED button on the remote control
to select the desired setting.
It is recommended that EP recordings are only
played back on the VCR on which they were
originally recorded.
Please refer to the TROUBLESHOOTING section of this manual for a more detailed
explanation of VHS/S-VHS cassettes and formats.
There will be picture interference and possibly a change to black and white picture
using Visual Fast Forward/Rewind functions.
Cassette
Length
Recording
Time
E-240 In Minutes
SP 240
LP 480
EP 720