User Manual

GB-6
IN STALLIN G YOUR VCR
AUTO IN STALLA TION
Press STOP to switch on your VCR.
This model will automatically tune in the TV channels in your area, sort them into a standard
order and set the clock.
The screen opposite should be showing on your TV.
Follow the instructions from the screens.
(Auto sort will take a few minutes to complete)
On completion, the MOVE MENU will appear
showing the present channel order. Press MEN U to
exit.
If the clock is NOT automatically set, the clock
screen will appear., refer to
MA N UALLY
SETTIN G THE CLOCK . To check the clock has
been set correctly, press DISPLAY until the time
appears on the display.
If you wish to customise the channel order refer to
MA N UALLY SORTIN G CHAN N ELS .
VCR RESET
1. Press STOP to switch on the VCR.
2. Press and hold MEN U and CHAN N EL buttons together on the front of the VCR
for 10 seconds.
3. The AUTO INSTALLATION screen should now be showing on your TV.
4.
Follow the on-screen display to proceed with auto installation.
✔
All the programmes should now be correctly tuned in and the clock set.
Refer to the CUSTOMISED IN STA LLA TION chapter if
• Your VCR could not tune automatically - due to for example poor reception.
• You wish to re-arrange the channel order.
• You wish to change the time on the clock or if the VCR could not set the time.
• If the screen above does not
appear, follow the procedure
VCR RESET below.
AUTO INSTALLAT ION
PRESS SET KEY TO START
AUTOMATISCHE E INSTELLUNG
ZUM BEGINN,DIE SET-TASTE
DRÜCKEN .
SET : E I NGABE MENU : ENDE
VC-MH71SM ENGLISH.book Page 6 Tuesday, April 20, 1999 10:52 AM