User Manual

GB-5
IN STALLIN G YOUR VCR
TUN IN G TH E TV IN TO TH E VCR
IMPORTAN T N OTE: By pressing t he STA N DBY but t on, t he VCR will t oggle
bet ween STA N DBY and LOW POWER modes. The VCR display will not be
illuminat ed in low power mode.
1. Ensure your VCR is still in the STANDBY
mode (not low power).
2.
Switch on the TV. Select an unused
channel on your TV for your VCR (there
may be a dedicated video channel refer
to your TV operation manual).
3. Press and hold the MEN U button for 3
seconds. The VCR will search and display
the ideal RF channel.
4. Tune the selected channel on your TV
(refer to your TV manual) until the menu
screen appears.
5.
Press SET to store the RF channel and to
place the VCR back into STANDBY.
NOTE:
✔
The TV is tuned to the VCR.
• If you have a preferred channel, the RF channel can be set manually (21-69) after
Step 3 using [ / ] keys.
VCR
Example:
MEN U SCREEN
TIMER
MODE
GRUNDE INSTELLUNG
MN : WÄHLEN
SET :E INGABE MENU :ENDE
VC-MH71SM ENGLISH.book Page 5 Tuesday, April 20, 1999 10:52 AM