User Manual
GB-23
ADVAN CED OPERATION
SEA RCHIN G THE VIDEO TAPE
DIGITAL PROGRA MME SEARCH SYSTEM (DPSS)
Your VCR records a marker signal on the tape at the start of each recording. These signals can
be used later to locate the starting point of a recording.
Press
DPSS to locate a previous programme or the next programme.
For example,
1. Load the video tape into the VCR.
2. Press DPSS three times. A 3 will appear on the on-screen display, and the VCR will
fast forward to locate the third recording after the current one.
3. Press DPSS once. A -1 will appear on the on-screen display and the VCR will rewind
to locate the beginning of the current recording.
4. To cancel the search before it has finished, press STOP ( ) or PLAY/X 2 ( ) .
NOTES:
• Recordings must be longer than 3 minutes..
• The starting point of playback may vary.
• This feature will only work with video tapes recorded on a VCR with the DPSS feature.
/
-1
+1
+2
+3
RECORDING 5
RECORDING 4
RECORDING 3
RECORDING 2
RECORDING 1
DPSS
Signals
Current tape position
Fast ForwardRewind
DPSS
Number
VC-MH71SM ENGLISH.book Page 23 Tuesday, April 20, 1999 10:52 AM