User Manual

20
If problems persist contact the SHARP Helpline on tel: [phone]
ADVANCED OPERATION
RECORDING FROM OTHER EQUIPMENT
You can record video and audio signals from various external sources, such as a camcorder,
onto a video tape using your VCR.
For example, recording from a camcorder connected to LINE 1 IN/OUT on your VCR:
1. Connect your signal source (eg. Camcorder,
Digital Camera etc) to the desired scart socket
on the back of the VCR using the manufacturers
recommended cable (not supplied).
2. Ensure that the tape on which you wish to record
is inserted into the VCR.
3. Press INPUT SELECT on the remote
control until the VCR display shows AV.
4.
Press REC to start recording.
NOTE:
• There are many different ways of connecting external equipment to your VCR. Please
refer to your equipment operation manuals for further information.
Optional Scart connection (not supplied)
Mono/Stereo Camcorder
INPUT SELECT CHANNEL AM/PM
REW FF
PLAY / X2
78
0
9
➘
Input Select
INPUT
SELECT
REC