Specifications

6.10 PICK-OFF PAWL REPLACEMENT
NOTE: Cover the drum with the protective sheet after removing it from the
drum unit. This prevents the drum from being exposed to light.
1. Remove the drum unit, then separate the drum [A] from the unit. (See the
Drum Replacement section.)
2. Remove the pick-off pawl bracket [B] (2 screws).
3. Remove the screws [C] and the springs [D], then replace the pick-off
pawls [E].
NOTE: When replacing the new pick-off pawls, make sure that the springs
are positioned correctly as shown in the illustration.
[A]
[E]
[C]
[B]
[D]
1 December 1990
5-71