Specifications

4
WIZORD™ 2 and 4
The Merlin 4 offers what the Wizord 4 has in terms of features, but with
remote control through a dedicated keypad. The keypad also allows the
user and the installer to program and control the energizer from a remote
location. This allows the energizer to be installed near the fence and the
keypad to be located where it is most convenient for the user. Additional
features that the standard Wizord does not have, can be enabled through
the keypad.
FEATURES
Siren trigger times and frequency can be adjusted as required
Voltage outputs can be controlled to reduce or increase the output
energy as required by the user
High and low voltage modes to change the power output of the
energizers and yet keep the alarming capability intact
Gate chime to notify if the gate has been opened and closed
Bypass options for the siren, strobe and gate as required
Siren times can be programmed to suit the different needs of the user
MERLIN 4
The Wizord 2 (formerly known as the Druid 2) has been welcomed
into this category of unsurpassed reliability andeld testing success
and stability. The Wizord 4 is the logical choice for domestic and light
industrial installations where a medium powered energizer is required.
This generation of energizers has beeneld tested for many years and
boasts unsurpassed reliability. Simple to install and easy to maintain.
FEATURES
High voltage monitor will alarm when the live wires are tampered
with
Earth wire monitor will alarm when the earth wires are tampered with
Easy to use tag switch for controlling the unit
Can be upgraded to a Merlin 4 energizer
Connectable to an armed response radio
Gate monitor input monitors the position of the gate to indicate if the
gate is open
Lightning and power surge suppression built in to reduce the
possibility of damage due to power surges
Battery backup system in case of power failure
Intelligent power saving to extend the battery life and save energy
Siren and strobe outputs to indicate fence condition