Specifications

16
FREE STANDING BRACKETS
Nemtek offers an angle iron or round post solution to the free standing corner straining post and end post requirements
which generally will be concreted into the ground. Both the round pole and the angle iron versions are predrilled to fit the
Nemtek hot dip galvanised hooks, tensioners and strain insulators saving time.
Nemtek standards are a relatively new addition to the intermediate brackets, used with the pop through insulator for
higher security needs. The wire cannot be removed from the standard without being cut ensuring an alarm.
Corner and end straining poles Number
of wires
Number
of holes
Fence
height
Finish Associated stays
Angle iron 60 x 60 x 6 mm – 2.4m 20 2 x 20 2m Painted or Hot dip
galvanised
Angle 40 x 40 x 5 mm –
2.6m
Angle iron 60 x 60 x 6 mm – 3.0m 24 2 x 24 2.4m Painted or Hot dip
galvanised
Angle 50 x 50 x 5 mm –
3.0m
Round Tube 78 mm x 2 mm – 2.4m 20 2 x 20 2m Hot dip galvanised Round 2 x 38 mm – 2.4m
Intermediated posts Number
of wires
Number
of holes
Fence
height
Finish Associated insulators
Nemtek standard 2.4m 20 20 2m Hot dip galvanised Pop through, Y standard
Nemtek standard 3.0m 24 /26 26 2.4m/
2.6m
Hot dip galvanised Pop through, Y standard
Y standard 2.4m 20 48 2m Bitumen coated Y standard
Y standard 3.0m 24 60 2.4m Bitumen coated Y standard
Y standard 3.6m 30 72 3m Bitumen coated Y standard
Note: Hole spacing may vary depending on the production batch