Specifications

8
NETWORKED ENERGIZER AND COMMUNICATING ACCESSORIES
MERLIN STEALTH MASTER M25M, M28M
COMMUNICATION CARDS
SLAVE 2 SLAVE 3 SLAVE 4 UP TO
SLAVE 9
KEYPAD
20
ZONE
MASTER
Both the Fiber Optic card and the RS485 cards can be installed inside the Merlin Stealth energizer housing and are powered
by the energizer. Fiber Optic cards are the preferred option and must be used in high lightning areas.
RS485 CARDS FIBER OPTIC CARD
The Merlin Stealth Master energizer, is a dual zone energizer and can control up
to nine standard Merlin Stealth dual zone energizers. That means a total of 10
energizers can be controlled together and divided up into 20 fence zones.
Any number of dual zone energizers can be networked, forming a basic 4 zone, 6
zone or up to the 20 zone system as required.
The complete control of the system is done through a 20 zone keypad which is
supplied with the Merlin Stealth Master energizer.
FEATURES OFFERED BY THE 20 ZONE MASTER CONTROLLER SYSTEM
• The master energizer is also an energizer with two zones thus the cost per zone
is reduced
• It can be configured with any number of energizers that the system requires (max
of 10 including the master)
• Uses existing proven 16 Mhz Merlin Stealth dual zone energizer units as slaves
• Multi energizers offer an increased level of security – the zones run
independently, so even if there is a breach of 1 zone, the rest of the zones will not
be compromised
• Individual slave energizers can also be controlled by the 20 zone keypad
• Controls the energy output per adjacent zones so that the system does
not exceed the maximum legally permissible output
SLAVE 1