User Manual

29
CUSTOMISED INSTALLATION
MANUALLY TUNING A CHANNEL
It should not be necessary to tune in a broadcast channel manually except in unusual
circumstances such as poor signal.
To manually tune in a channel follow the procedure below.
1. Press MENU .
2.
Press [ / ] to select SET UP. Press
SET to confirm.
3. CHANNEL PRESET will be
highlighted. Press SET .
4. Press [ / ] to select
CHANNEL
.
5. Press [ / ] to start tuning in either
direction. Tuning will stop when a channel
is received. If it is not the desired channel,
press [ / ] to continue tuning.
6.
Press [ / ] to select FINE
TUNING
. Press and hold [ / ] until
the sharpest colour picture is obtained.
8.
Press [ / ] to select SKIP.
The SKIP function determines whether the
channel can be selected when using the
CHANNEL / instead of the
NUMBER BUTTONS
.
9. Press [ / ] to select ON or OFF for this
option.
10.
Press SET to confirm.
11. Press MENU to leave this function.
IMPORTANT NOTE:
7.
If you connect an independent
decoder, you must press [ / ] to
select DECODER, then select [ / ] to
turn the decoder function ON.
CHANNEL PRESET
CHANNEL SORT
CLOCK
LANGUAGE
➔
PRESET 1
SYSTEM L B/G D/K
CHANNEL CH2 1
FINE TUNING
▲
▲
DECODER ON OFF
SKIP ON OFF