User Manual

27
ADVANCED OPERATION
RECORDING FROM OTHER EQUIPMENT
You can record video and audio signals from various sources, for example a camcorder, onto
a video tape using your VCR.
For example, recording from a camcorder connected to LINE 2 IN/DECODER on your VCR:
1.
LOAD TAPE INTO THE VCR.
2.
Press INPUT SELECT on the
remote control until the VCR display
shows L2 .
3. If you wish to record from a source
connected to LINE 1 IN/OUT, select
L1 .
4. If you wish to record from a source
connected with audio phono leads
to the sockets on the front of the
VCR (if fitted), select
L3 .
5. Press
REC
to start the recording.
NOTE:
• There are many different ways of connecting external equipment to your VCR. Please
refer to your equipment operation manuals for further information.
Optional Scart connection (not supplied)
Mono/Stereo Camcorder
RF OUT
SORTIE ANTENNE
ANTENNA IN
ENTREE ANTENNE
LINE2(II) IN
/DECODER
CANAL PLUS
/L2(II)
LINE1(
I)IN
/OUT
SON/VIDEO
(L1/
I)
LINE2(II) IN
/DECODER
CANAL PLUS
/L2(II)
LINE IN 3
VIDEO
L - AUDIO - R
ENTREE CANAL
RET.RAP. AV.RAP.
LECTURE/X2
78
0
9
AM/PM
➘
INPUT SELECT