User Manual

BASIC OPERATION

HOW TO USE TO MAKE A RECORDING

• If appears on the VCR display, press TIMER ON/OFF before starting.

• Check that the clock is displaying the correct time.

SHOWVIEW allows you to program the VCR to record up to eight programmes using the

SHOWVIEW numbers published in TV listings...

1. Press SHOWVIEW on the remote control

2. Enter the SHOWVIEW number from the TV

listing using the NUMBER BUTTONS.

NOTE:

3. Press [ / ] to select ONCE, WEEKLY, DAILY

4. If you want to make additional recordings at the same time each day or week, then use

[ / ] to select the WEEKLY, or DAILY option as appropriate.

5. Press SET to confirm..

NOTE:

The first time that you use SHOWVIEW to make a

recording on each channel Preset, (PR) may be

highlighted on the menu.

6. Enter the channel you wish to record using

the NUMBER BUTTONS, for example if

you wish to record channel 2 press 0 2. The

VCR will remember this for the future.

NOTES:

• An ERROR message will appear if you have entered a number that is not a current

SHOWVIEW number. If this happens press CLEAR to delete the numbers as required

and enter the correct SHOWVIEW number

• Check that the menu list agrees with the times shown in the TV listing. If it does not press

CLEAR to return to the SHOWVIEW menu, and re-enter the correct SHOWVIEW number

You may also access the SHOWVIEW menu by the following procedure:

i. Press MENU.

ii. The SHOWVIEW option will be highlighted. Press SET to confirm.

Continue from step 2 above.

1/2

DATE PR START STOP

21/06

02 12:00 13:00SP

--/-- -- -:-- -:----

PR : CH2 1

 :SELECT  : CHANGE

SET : ENTER MENU: EX I T

→

SHOWVIEW NO. -

ONCE

WE E K L Y D A I L Y