Specifications

NH
Recording with the Timer
The timer can be set manually for automatic recording of up to 8 events over a 365 day period.
PREPARATION
*Load the cassette, ensuring the erasure protection hole is covered. The VCR power will automatically
turn on.
@Check that the clock is displaying the correct time. (See Setting the Clock on page 11.)
PROCEDURE
; Example: Recording channel position 47 in SP mode from 12:OO PM to 12:30 PM, December 15,
/
1997, if the present time is IO:28 (morning), December 14, 1997.
[Menu]
@ Press the MENU button.
MENU
SET
Select the TIMER-setting mode and press the
0
SET button.
CI1AIIIIL PIE**=
[Timer position]
@ Select the timer position with the A/V buttons
A
SET
and press the SET button.
;
‘0
l If the timer positions 1 to 4 have already been
0
set, the screen changes 2/2 (timer positions 5
to 8).
When the clock is
set to 24H mode,
i‘
-:--” will appear.
l Press the TIMER button (for VC-A410X) or the
G-CODE/TIMER button (for VC-HGIOX) to di-
rectly select the TIMER mode.
[Date]
PI START STOP
m__ _:___ _:___sp
__,__ __ _:___ _;_____
__,__ __ _,___
__I__ __ _,___ _:_____
@ Set the date for timer recording with the numeric
Numeric
or A / v buttons on the remote control and then
buttons
press the b button.
I) b
l First set the “day” digits and then “month”. If
there is only one “day” or one “month” digit,
enter a 0 first.
@ If you want to record only once, press the
PI ST&R* SIOP
[Once]
_i__- -~---sp
b button and go to step 0. Otherwise, select ‘ID
__,__ __ _,___ _:_____
_,___ -:-_---
0
(DAILY)” to record at the same time each day or
_,___ _,-----
[Daily/Weekly]
’ A/V I) b
“W (WEEKLY)” to record at the same time each
week by pressing the A or v button, and then
pressing the b button.
[Channel]
@ Set the channel number using the numeric or A /
Numeric
V buttons and then press the b button.
buttons
PR START STOP
15/11 m -:--- -:---BP
@To record audio and video from an external source
::::: :I _*-__ _I _____
through an AUDIO/VIDEO terminal on the VCR, press the
A / V buttons to select an AV channel. (When an AV
position is selected,
“Ll” or “L2” IS displayed where a
channel position number is usually displayed.) (VC-A41OX
is only equipped with AUDIO/VIDEO (rear) terminals.)
I>
Continued on next page
. A /v buttons can also be used to set the date and time instead of the numeric buttons.
l Press 0 first if the day, month, hour or minute is a single digit.
25