Specifications

q
Simple Recording Timer
There are two ways to use this Simple Recording Timer
1 l Immediate recording:
for your convenience.
Immediate Recording
Convenient when having an unexpected visitor or
telephone call.
l Delayed recording:
Convenieni when leaving the house or going to bed.
8
S.PICTURE ON
SP
REC
0
a
0 2
S.PICTURE ON
e3
STEREO
SP
STOP 9:30AM L R
REM 2:00
o:oo.oo
l Press the STOP button to terminate recording.
Delayed Recording
STEREO
LR
BTIME
n
2
S.PICTURE ON,, , , ,
DSTART --8:40AMSTEREO
f/ ! \ k
SP LR
REC
f
8
2
1
o I
S.PICTURE ON
0
BSTART
8:40AMSTEREO
\\I,/
SP STOP -9:30AM- L R
Y/I\\
I
OPERATE
0
. . .
0 Select the channel position to be recorded by
pressing the CHANNEL @/@ buttons.
(Ex. : Channel position: 2)
In each step, Vn (or STEREO) and t R apee&@%
the screen fur VC-HGIOX.
. .
@ Press the REC button to enter the normal
recording mode. Then, press the REC button
repeatedly to set the desired ending time.
(Ex.: Ending time: 9:30 AM)
INoTE)
l Each press of the REC button increases the stop time by 10
minutes.
l If necessary, press the CHANNEL 010 buttons to change
the minutes setting.
@ Select the channel position to be recorded by
pressing the CHANNEL @/@ buttons.
(Ex. : Channel position: 2)
@ Set the starting time by pressing the aTIME
button. (Ex.: Starting time: 8.40 AM)
i>
l Each press of the aTIME button increases the start time by
10 minutes.
l Setting the time within a 24-hour period in lo-minute intervals
is possible.
l Press the CHANNEL O/O buttons to adjust the minutes if
necessary.
@ Set the ending time by pressing the REC button.
(Ex.: Ending time: 9:30 AM)
I-WTF-)
l Each press of the REC button increases the stop time by 10 minutes. -
l If necessary, press the CHANNEL 010 buttons to change the
minutes setting.
@ Press the OPERATE button to turn off the power. j
(Ex. : Present time: 8:28 AM)
I
I
l After the Simple Recording Timer is set, the channel position cannot be changed.
l To confirm the starting time and the ending time, first press the OPERATE button to turn on the power. Then press the IDW~E button to confirm
the starting and ending time. Press the OPERATE button to turn off the power.
l To clear the Simple Recording Timer setting during setting of “Delayed Recording”. press the CLEAR button on the remote control. TO clear after
setting, turn on the power, press the BTIME button to select Simple Recording Timer mode. and then while the DSTART time is flashing. press
the CLEAR button.
l The Simple Recording Timer cannot be set if the timer has been preset (“a” indicator on the VCR display is lit). If this is the case, cancel the timer
standby mode by pressing the TIMER ON/OFF button, Win on the power and then proceed with setting of the Simple Recording Timer.
l Select the SP (Standard Play) or LP (Long Play) recording speed with the TAPE SPEED button on the remote control (“SP” or “LP” will light up on
the VCR display). SP (Standard Play) gives the best picture quality. LP (Long Play) gives the largest recording time.
l The stop time for delayed recording must be set within 10 seconds of setting the start time otherwise start time must be set again.
24