Specifications

!!§I
Setting the Channels
Your VCR can receive VHF channels 0 to 12, and UHF channels 28 to 69. Your VCR has 4t
programmable channel positions, each of which can be set to any of the above broadcas
channels. The channel positions have been preset at the factory as shown below.
POSlllon
Preset N Channel Posttbon Presel TV Channel
j-W%->
/
l Use the A / ‘I / 4 / b buttons on the remote
0
8 Skrpped channel
control to set the OSD.
1 Skipped channel ’ 9 VHF 9
,
l Channel position numbers 1, 3, 4, 8, 11 to 27, ant
2
VHF 2
10
/
VHF 10
29 to 46 have been factory set to be skipped wher
3 Skipped channel I
11-27
/ Skipped channel
the CHANNEL @ or @ button is used.
4 Skipped channel /
28
UHF 28
l If the picture is not clear, if you want a differer
5
VHF 5A
channel from the one preset or if you wish to reset I
29-46 Skipped channels ’ skipped channel, reset the channel as follows.
6 VHF 6
7 VHF 7 47
I
AUTO TUNING
PREPARATION
l Select the video channel on your TV. Press the OPERATE button to turn on the VCR.
!
UENU
SELECT :A V
ENTER :SET EXIT :PENU
A
SET
A
MANUAL
I
SELECT :A V
ENTER rSET
EXIT
:umau
SET
0
0
AUTOMATIC TUNING.
PLEASE WAIT.
-______________________
EXIT : MENU
*
Normal
Screen
@ Press the MENU button.
Select item ‘CHANNEL PRESET” with the A/V
buttons, and press the SET button.
@ Select item “AUTO” with the A/V buttons and
press the SET button.
!>
@CHANNEL PRESET has been preset to MANUAL at
the factory.
0
The channel display on the TV screen will con-
tinue through all of the channels and when
finished, the TV screen will return to the normal
screen.
l If additional unwanted channels were found, refer to page 14 to skip unwanted channels.
l If some channels were unable to be found, please refer to page 13 for Manual Tuning.
12