Specifications
!si
Setting the Clock
Vhen you use the VCR
x the first time or after a
lower failure of more
Ian 60 seconds the
lock will be reset. Apply
:ower to the unit to
witch it on and press the
‘IENU button. Then per-
x-m the following pro-
edure.
(VC-A4 1 OX)
OPERATE
MENU
4/./r/r
buttons
Numeric
buttons
AM/PM
NITIAL SETTING OF CLOCK
(VC-HGIOX)
OPERATE
- SET MENU
W.!A/v
buttons
Numeric
buttons
AM/PM
- SET
0
First set the language (Refer to page 10). Then press the SET button.
CLOCK
MODE :248/12B
SELECT :4 b
CBANGE:A V
ENTER :SET
EXIT :MENU
Numeric
buttons
MODE TIME
DATE YEAR
l2H B l/O1 00
MODE :24H/12B
SELECT :4 b
CBANGE:A V
t
ENTER :SET
EXIT : MENU
f
Numeric
buttons
Of
10:28AH m 00
I),
DATE :DAY/MONTH
I
Numeric
buttons
I
MODE
TIME
DATE YEAR
12x 10:28AM 15/12 m
I
SET MENU
0
0
*
0
@ Select whether the clock should show 12-hour AM/
PM time or 24-hour time by pressing the A/V
buttons, and then press the b button.
Ex.: 72H
I>
l “24H” . . . . . . . . . . . . . . . 24-hour display.
l “IZH”
. . . . . . . . . . . . . . . . . . . . . 12-hour AM/PM display.
l 12H (AM/PM) mode is preset at the factory.
@ Set the present time with the numeric or A/V but-
tons on the remote control and then press the b
button. (First set the ‘hour’ digits and then the ‘min-
ute’. If there is only one ‘hour’ or one ‘minute’ digit,
enter a 0 first.) Set AM or PM. using the AM/PM
button. (12 hour)
Ex. : 10:28AM
pam-->
l If 12H mode was selected, then set the AM/PM
indicator
@ Set the date with the numeric or A/V buttons on
the remote control, and then press the b button.
(First set the ‘day’ digits and then the ‘month’. If
there is only one ‘day’ or one ‘month’ digit, enter a
0 first.)
Ex.: Dec. 15 (15712)
@ Set the year digits with the numeric or A/V but-
tons on the remote control. (If there is only one
‘year’ digit, enter a 0 first.)
Ex.: 97
@ Press the SET button. To return to the Normal
screen, press the MENU button.
SHANGING THE CLOCK SETTING
* If the clock has already been set previously and you want to change it, select “clock”
follow the procedures above.
rom the MENU, and then
.
Select item “CLOCK” with the A/v buttons and
press the SET button.
.
SET
0
0
Normal
Screen
@ To return to Normal Screen, press the SET button.
11