Service manual

Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code
84
VC-A410U
VC-H810U
PRECAUTION ON FRONT PANEL SET-UP
Cassette cover
Cassette cover
open lever
Cassette housing
Cassette cover
open lever
Cassette cover
open lever
Cassette cover
About 45°
Front panel
1
5
2
4
3
Removing the cassette compartment cover.
1 Open the cassette compartment cover
fully.
2 Remove the center positioner.
3 Slide the cover to the right.
4 Slightly bend the cover.
5 Draw out the left-side rod.
Do not mount the front
panel with the cassette
cover tilted too open.
Otherwise the cassette
cover might wrongly run
on the cassette housing.
Keep the cassette over about
45° open and make sure that
the cassette cover open le-
ver is between the front panel
and the cassette cover. Now
fix the front panel in place.
Before attaching the front
panel in position, make
sure that the cassette cover
open lever is in its right
place (lower-most). If it is
out of position, push it down
with a finger.
A
B
C
D
E
F
123456
FRONT PANEL PARTS
500-7
500-3
STOP
PLAY
REW
FF
500-1
501
502
500-4
500-2
500-6
500-5
500