Specifications

!!m
Simple Recording Timer
There are two ways to use this Simple Recording Timer
for your convenience.
Immediate Recording
l Immediate recording:
1 Convenient when having an unexpected visitor or
telephone call.
l Delayed recording:
Convenient when leaving the house or going to bed.
0 CHANNEL 0
f-G-7
n
2
S.PICTURE ON
STEREO
SP LR
. REC
0
REC
(0)
0
0
2
S.PICTURE ON
q
STEREO
SP
STOP 9:30AM L R
0:OOAM
IS/12 97
REM 2~00
o:oo.oo
l Press the STOP button to terminate recording.
Delayed Recording
@I TIME
0
OTIME
(0)
n
2
FJ.PfCTURE ON,, , ,,
QSTART ->;I;PM,STEREO
SP
LR
. REC
0
REC
(0)
0
n
2
S.PZCTURE ON
BSTART ~:~OAMSTRREO
\\I,,
BP STOP -9:30AM- L R
//I\\
0 Select the channel position to bp recorded by
pressing the CHANNEL 010 buttons.
(Ex. : Channel position: 2)
In each step, STEREO and L R appear on the
screen for VC-H660X.
@ Press the REC button to enter the normal
recording mode. Then, press the REC button
repeatedly to set the desired ending time.
(Ex.: Ending time: 9:30 AM)
rFJGTr--
l Each press of the REC button increases the stop time by IO
minutes.
l If necessary, press the CHANNEL O/O buttons to change
the minutes setting.
@ Select the channel position to be recorded by
pressing the CHANNEL O/O buttons.
(Ex. : Channel position: 2)
@ Set the starting time by pressing the BTIME
button. (Ex. : Starting time: 8:40 AM)
rFiim>
l Each press of the aTIME button increases the start time by 10
minutes.
l Setting the time within a 24-hour period In lo-minute intervals is
possible.
l Press the CHANNEL O/O buttons to adjust the minutes if
necessary.
@ Set the ending time by pressing the REC button.
(Ex. : Ending time: 9.30 AM)
/-wTiF>
l Each press of the REC button increases the stop ttme by 10 minutes
l If necessary, press the CHANNEL 010 buttons to change the
minutes setting.
@ Press the OPERATE button to turn off the power.
(Ex. : Present time: 8.28 AM)
. After the Simple Recording Timer is set, the channel position cannot be changed
. To conflrm the starting time and the ending time, first press the OPERATE button to turn on the power. Then press the QTIME
button to confirm the starting and ending time. Press the OPERATE button to turn off the power.
l To clear the Simple Recording Timer setting during setting of “Delayed Recording”, press the CLEAR button on the remote control.
To clear after setting, turn on the power, press the OTIME button to select Simple Recording Timer mode, and then while the a
START time is flashing, press the CLEAR button.
l The Simple Recording Timer cannot be set if the timer has been preset (“Q” indicator on the VCR display is lit)
If this IS the case,
cancel the timer standby mode by pressing the TIMER ON/OFF button, turn on the power and then proceed with setting of the
Simple Recording Timer.
l Select the SP (Standard Play) or LP (Long Play) recording speed with the TAPE SPEED button on the remote control (“SP” or “LP”
will light up on the VCR display). SP (Standard Play) gives the best picture quality. LP (Long Play) gives the largest recording time.
l The stop time for delayed recording must be set within 10 seconds of setting the start time otherwise start time must be set again.
24