User`s manual

Chapter 3 Configuration
71
protocol for handshaking.
The standard HDLC address for the Ethernet
encapsulated with LAPS is 4.
Control（0~FF）
Select the HDLC control address to be used by the LAPS
protocol for handshaking.
The standard HDLC control value for the Ethernet
encapsulated with LAPS is 3.
SAPI value（0~FFFF）
Select the service access point identifier (SAPI) for the
LAPS protocol.
The standard SAPI for the Ethernet MAC is FE01.
3.7.10 Cross Connect
This web page allows user to set Cross Connect. Map the payload from the
various MUXpro interfaces to specific TUs, for transmission through the SDH link.
Figure 3-25 Cross Connect
Table 3-11 Description of Cross Connect function
Pull down menu Description
Operation Choose which VCG or E1 that will be mapped
Optical 1 & 2 If the Protection is disabled, user can choose which optical
port to be used.