User`s manual

Chapter 1 Overview
35
Optical Output
Power
-6dBm
Receiver Sensitivity -34dBm
Connectors SC or FC/PC
Timing SDH Timing Source
‧ Internal clock
‧ RX SDH – Locked to clock recovered
from STM-1 interface
‧ RX PDH – Locked to clock recovered
from selected PDH interface
PDH Timing Source
‧ RX SDH – Locked to clock recovered
from STM-1 interface
‧ RX VC-12/RX VC3 – Locked to clock
recovered from VC-12 received from
remote end
Indicators General System
Indicators
‧ PWR (green) – Power
‧ TST (yellow) – Test
‧ MAJ ALM – Major alarm
‧ MIN ALM – Minor alarm
‧ ACO – Alarm Cut Off
‧ TRI ( For MUXpro 8216) – Tributary
LAN Port Indicators
‧ LINK (green) – LAN link integrity
‧ ACT (green) – LAN data activity
STM-1 Port
Indicators
‧ LOS1 (red) – Loss of Signal Optical 1
‧ LOS2 (red) – Loss of Signal Optical 2
Power Supply Voltage
AC Source
110 to 240+10VAC
50 to 60+3Hz
Supply Voltage
DC Source
-36 to -72 VDC
Physical Dimension MUXpro 820: Half 19”, 1U
210mm(W)*285mm(D)*41mm(H)
MUXpro 8216: Full 19”, 1U
437mm(W)*287mm(D)*44mm(H)
Operating
Environment
Operating
temperature
0 to 50°C / 32 to 122°F
Storage temperature -25 to 70°C / -13 to 158°F
Relative humidity Up to 95%, non-condensing