Technical data

38
SINGLE SKIN TANKS
For agricultural, commercial and industrial applications
Balmoral storage tanks are rotationally moulded in one
piece to provide a seamless unit that is environmentally
sensitive and cost effective. These tanks can be used to
contain a variety of liquid products such as heating oils,
diesel and non-potable water.
Balmoral supplies tanks for standard above ground use as well
as underground and bunded tanks for the following sectors:
Q Commercial and private businesses
Q Agricultural industry
Q Road haulage industry
Balmoral’s product range has been assessed by key legislative
bodies within the UK. High levels of quality are consistently
achieved by the use of state-of-the-art manufacturing
techniques and recognised European quality control systems.
These tanks can be used to contain a variety of liquid products
such as:
Q Heating oils
Q Diesel
Q Kerosene (BS2869)
Q Up to 7% mixture biofuel (BSEN14213, BSEN14214)
Single skin tank features
Q High impact strength
Q Can be installed at ground level using “Tigerloop”
Q Manufactured in high quality recyclable polyethylene
Q Standard 1” BSP (female) connector outlet
Q Ø 2” BSP fill point with cap
Q Lightweight and easy to handle
Q UV stabilised
Q Corrosion resistant
Q Fully vented
Q Cost effective
All tanks are supplied with air vent, cap and chain.
To comply with Control of Pollution regulations, all standard
tanks should be fitted with an overfill prevention device
where an air vent cannot be observed whilst filling.