Technical data

29
Monitoring the Superfill contents
Electronic contents gauge
Balmoral Superfills are supplied with an electronic level
monitoring gauge. The measurement reader is situated within
the bund, on top of the inner tank, and has a leak detection
device within the bund cavity. The display unit is connected
to a standard 3-pin socket in house/premises.
This system is pre-set at the factory and, once activated, will
display the tank contents in 1/10th's, and will also display a
warning in the event of a spill or leak into the bund cavity.
Analogue flow meter
The analogue meter on the fuel delivery system has two
readings:
i 3-digit batch total which can be reset
ii 6-digit totaliser which cannot be reset
Fuel dispensing
The Superfill is provided with four or six metres of delivery
hose as standard with a trigger-activated nozzle.
With the delivery system switched on, fuel delivery is
activated by pulling the trigger on the nozzle. Once fuel is
delivered the nozzle is replaced in the holster when not in
use.
On the 5000, 7500 and 10,000 litre models, a removable
drip tray is provided which catches drips from the 2" fill
port.
Figure 4: Superfill
TM
cabinet contents
5000, 7500 and 10,000 litre models
2500 litre models
Key
1 Double pole isolator switch
2 Nozzle
3 2" tank filling port with dry break coupling
4 Drip tray
5 1” delivery line
6 Quick release couplings
7 Analogue flow meter
8 1” Valve (Available on 5000, 7500 and 10,000L models)
9 Cabinet lamp (Available on vertical 2500, 5000, 7500 and 10,000L models)
10 Fuel pump
11 Remote contents gauge
1
3
4
5
7
8
6
9
6
11
2
10
9
3
1
10
6
6
5
7
11