Specifications

Messages and Signals

Display messages

Note: If you have turned on the Caller ID funciton, see Caller ID in Chapter 7

for display messeges related to Caller ID.

CHECK PAPER The thermal paper is jammed or isn’t loaded properly.

Remove and reload the paper. (See the following

section, Clearing Paper Jams.)

COVER OPEN The operation panel is open. Close it.

DOCUMENT JAMMED The original document is jammed. See the following

section, Clearing Paper Jams.

FAX RX IN MEMORY A fax has been received in memory because you

have run out of thermal paper or the paper is

jammed. The fax will print out automatically when the

problem is fixed.

FUNCTION MODE The FUNCTION key has been pressed.

HOLD The HOLD/SEARCH key has been pressed to put

the other party on hold during a phone conversation.

Press the HOLD/SEARCH key again to take the

other party off hold.

KEY LOCK The Key Lock function has been activated to prevent

unauthorized use of the

machine (see page 64).

LINE BUSY This appears if you attempt to send a fax by

automatic dialling and the line is busy or the receiving

fax machine doesn’t answer. Press the STOP key to

clear the message.

LINE ERROR Transmission or reception was not successful. Press

the STOP key to clear the message and then try

again. If the error persists, see Line Error on page 73.

all.book Page 78 Wednesday, November 2, 2005 1:03 PM