User Manual

Making a Phone Call

Pick up the cordless handset and press .

• appears in the display.

• Note: If the cordless handset display shows BUSY, you must wait until the

machine is no longer in use to use the cordless handset.

When you hear the dial tone, dial the

number.

• If you are on a Flash-type PBX and are

dialing out, press , wait for the

connection to the outside line, and then

dial the number.

When you are ready to end the call, press .

• If the END CALL setting is set to “ON” (see page 63), you can also end the

call by simply placing the cordless handset in the cradle (or charger if you

have one).

Cordless handset receiver volume

To adjust the volume of the cordless handset receiver when talking on the

cordless handset, press or .

Making a Phone Call