User Manual

Setting Up the Cordless Handset

1. Installation

Connect the battery connector ➊

Place the battery cover on the cordless

handset, making sure it snaps firmly

into place.

Place the cordless handset in the

cradle on the machine with the dial pad

facing up.

• Important! The dial pad must face up,

or the batteries will not charge.

• The batteries charge automatically

while the cordless handset is in the

cradle. While charging, the display

shows:

When charging is finished, the battery

icon appears full:

♦ The cordless handset may feel warm while charging. This is normal.

♦ The batteries cannot be overcharged. When not using the cordless

handset, keep it in the cradle to ensure that it is always charged.

♦ When the batteries need charging, will blink in the display and you will

hear beeps during a phone conversation. If you need to continue the

conversation, transfer the call to the machine or to another cordless

handset (see page 57). Place the cordless handset in the cradle and let it

charge.

Note: If the batteries are extremely low, nothing may appear in the display

during the first several minutes that the cordless handset is in the cradle. The

battery will begin to charge normally after several minutes.

♦ To ensure that the battery charges properly, wipe the charger contacts once

a month with a cotton swab.

Charge the batteries

for at least 12 hours

the first time!